74ACT373SJX

74ACT373SJX Overview

In the 20-SOIC (0.209, 5.30mm Width) package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). Tri-State is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ACT series. With this electronic part, there are 8 bits. There is no doubt that it belongs to the family 74ACT373. The 20 pins are designed into it. It is mounted according to the Surface Mount method. There are 2 input lines in which electronic circuits are present. High efficiency requires a supply voltage of 5V. 3 output lines provide binary equivalents of input lines. A total of 1 elements make up this object. The superior flexibility of this circuit can be attributed to the use of 8 circuits. 24mA represents the low level output current. The high level output current is set to -24mA. A temperature below 85°C should be used for operation. A temperature greater than -40°C should be used as the operating temperature. There is a maximum voltage of 5.5V supported. The minimal voltage for operation is 4.5V.

74ACT373SJX Features

20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pins
1 elements

74ACT373SJX Applications

There are a lot of ON Semiconductor 74ACT373SJX Latches applications.

• Serial Input
• Hammer Device Information
• Shift Registers
• General-Purpose Register
• Decade counting
• Relay
• Instrumentation
• Hammer
• Frequency dividing
• Buffer register