74ACT374MSA

74ACT374MSA Overview

As a result, it is packaged as 20-SSOP (0.209, 5.30mm Width). Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74ACT series. In order for it to function properly, its output frequency should not exceed 160MHz. The element count is 1 . T flip flop consumes 40μA quiescent energy. Members of the 74ACT374family make up this object. There is 4.5pF input capacitance for this T flip flop. This electronic part is mounted in the way of Surface Mount. This board has 20 pins. A Positive Edgeclock edge trigger is used in this device. The flip flop is designed with 8bits. Its flexibility is enhanced by 8 circuits. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It has 3 output lines to operate. It has 1lines. A high level output current of -24mAis set. There is 24mA output current at the low level. Temperatures below 85°Care ideal for operating. A temperature above -40°Cshould be used for the operation. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. It is possible to obtain a frequency of 160MHz.

74ACT374MSA Features

Tube package
74ACT series
20 pins
8 Bits

74ACT374MSA Applications

There are a lot of ON Semiconductor 74ACT374MSA Flip Flops applications.

• QML qualified product
• Modulo – n – counter
• EMI reduction circuitry
• Patented noise
• Communications
• Storage registers
• Digital electronics systems
• Parallel data storage
• Individual Asynchronous Resets
• Data transfer