74ACT377SC

74ACT377SC Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. T flip flop is configured with an output of Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 4.5V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. This type of FPGA is a part of the 74ACT series. A frequency of 175MHzshould be the maximum output frequency. In total, it contains 1 elements. As a result, it consumes 40μA quiescent current. The object belongs to the 74ACT377 family. Its input capacitance is 4.5pFfarads. There is an electronic component mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. An electronic part designed with 8bits is used in this application. To achieve this superior flexibility, 8 circuits are used. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It has 8 output lines to operate. It has 8lines. There is -24mA output current at the high level. It is set to 24mAfor the low level output current. Operating temperatures should be lower than 85°C. It should be higher than -40°Cwhen the system is operating. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. A maximum voltage of 5.5V can be provided by it. This can be achieved at a frequency of 175MHz.

74ACT377SC Features

Tube package
74ACT series
20 pins
8 Bits

74ACT377SC Applications

There are a lot of ON Semiconductor 74ACT377SC Flip Flops applications.

• Latch-up performance
• Memory
• Memory
• ESD protection
• Asynchronous counter
• Dynamic threshold performance
• Frequency Divider circuits
• Matched Rise and Fall
• Reduced system switching noise
• High Performance Logic for test systems