74ACT573PC

74ACT573PC Overview

In the package 20-DIP (0.300, 7.62mm), it can be found. Tube is the way it is packaged. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Through Hole. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series contains FPGAs of this type. This electronic part is designed with 8 Bits. 74ACT573 is the family name of it. In addition, it is designed with a pin number of 20. This electronic part is mounted in the way of Through Hole. An electronic circuit can be found on 8 input lines. With 24mA, maximum design flexibility is ensured. High efficiency requires a supply voltage of 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. A total of 1 elements make up this object. 8 circuits are used to provide this superior level of flexibility. 24mA is set as the low level output current. There is -24mA high level output current set. Operating temperatures should be below 85°C. It is recommended to operate at a temperature higher than -40°C. It supports the maximal supply voltage of 5.5V. A voltage of 4.5V is the minimum supply voltage required for it to operate.

74ACT573PC Features

20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT573 family
20 pins
1 elements

74ACT573PC Applications

There are a lot of ON Semiconductor 74ACT573PC Latches applications.

• Programmable binary
• Up/down difference counting
• PCs and Notebooks
• Relay replacement
• Parallel Output
• Serial Output Data Queuing
• Meter applications
• Multi-line decoders
• Shift Registers
• Ring counter