74ACT573SJ

74ACT573SJ Overview

It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. Tube is the way in which it is packaged. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. The voltage supply is 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74ACT series. Electronic parts with 8 bits are designed for this application. The family it belongs to is 74ACT573. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. It consists of 8 input lines from which an electronic circuit can be built. The supply voltage should be maintained at 5V for high efficiency. A binary equivalent of the input line is generated by the 3 output lines. A total of 1 elements are contained in it. Its superior flexibility is achieved by using 8 circuits. It has been set to 24mA for the low level output current. It is set to zero for the high level output current. There should be a temperature below 85°C at which the system is operating. Temperatures above -40°C should be used. The supply voltage is limited to 5.5V. With a minimum supply voltage of 4.5V, it operates.

74ACT573SJ Features

20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pins
1 elements

74ACT573SJ Applications

There are a lot of ON Semiconductor 74ACT573SJ Latches applications.

• Counting
• Clocks
• Frequency
• Display
• Parallel Input
• Counters
• Automotive ADAS
• Counter timers
• Automotive Body Electronics
• Communication systems