74ACT843SPC

74ACT843SPC Overview

Package 24-DIP (0.300, 7.62mm) includes it. The package is in the form of Tube. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. The electronic component is mounted according to the Through Hole method. A 4.5V~5.5V voltage supply is required for operation. It operates at -40°C~85°C degrees Celsius. The 74ACT series contains FPGAs of this type. 9 Bits are used in the design of this electronic part. It belongs to 74ACT843 family. In addition, it is designed with a pin number of 24. Mounting this electronic component follows the Through Hole method. An electronic circuit can be found on 9 input lines. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 3 output lines generate the binary equivalent of the input lines. It consists of 1 elements. It achieves superior flexibility by using 9 circuits. There is 24mA output current at the low level. In the high level output current, the value is set to -24mA. Operating temperatures should be below 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. It supports the maximal supply voltage of 5.5V. It operates with the minimal supply voltage of 4.5V.

74ACT843SPC Features

24-DIP (0.300, 7.62mm) package
74ACT series
9 Bits
74ACT843 family
24 pins
1 elements

74ACT843SPC Applications

There are a lot of ON Semiconductor 74ACT843SPC Latches applications.

• Flip-flops
• Communication systems
• Network Switches
• General-Purpose Register
• Decade counting
• Parallel Input
• Shift left register
• Address register
• Pattern Generators
• Shift register