74ACTQ16374MTDX

74ACTQ16374MTDX Overview

The flip flop is packaged in a case of 48-TFSOP (0.240, 6.10mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. The 74ACTQseries comprises this type of FPGA. There should be no greater frequency than 71MHzon its output. In total, it contains 2 elements. There is 80μA quiescent consumption. 48terminations have occurred. The power supply voltage is 5V. A JK flip flop with a 4.5pFfarad input capacitance is used here. Devices in the ACTfamily are electronic devices. There is a 5.5Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 4.5V. A total of 2ports are embedded in the D flip flop.

74ACTQ16374MTDX Features

Tape & Reel (TR) package
74ACTQ series

74ACTQ16374MTDX Applications

There are a lot of Rochester Electronics, LLC 74ACTQ16374MTDX Flip Flops applications.

• Storage Registers
• Frequency Dividers
• Parallel data storage
• Convert a momentary switch to a toggle switch
• Data transfer
• Data storage
• Bus hold
• ESD performance
• Divide a clock signal by 2 or 4
• Frequency Divider circuits