74ACTQ273PC

74ACTQ273PC Overview

20-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. In the configuration, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74ACTQ series. You should not exceed 189MHzin its output frequency. There are 1 elements in it. During its operation, it consumes 40μA quiescent energy. The 74ACTQ273 family contains it. Its input capacitance is 4.5pFfarads. A part of the electronic system is mounted in the way of Through Hole. The 20pins are designed into the board. This device has the clock edge trigger type of Positive Edge. There are 8bits in this flip flop. Despite its superior flexibility, it relies on 8 circuits to achieve it. Optimal efficiency requires a supply voltage of 5V. There are 8 output lines in this JK flip flop. Currently, there are 8 lines of input. -24mAis set as the high level output current. It is set to 24mAfor the low level output current. Ideally, the operating temperature should be below 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. It supports a maximum supply voltage of 5.5V volts. A frequency of 189MHzcan be achieved.

74ACTQ273PC Features

Tube package
74ACTQ series
20 pins
8 Bits

74ACTQ273PC Applications

There are a lot of ON Semiconductor 74ACTQ273PC Flip Flops applications.

• Storage Registers
• ESCC
• Common Clocks
• Reduced system switching noise
• Buffered Clock
• Data storage
• Clock pulse
• Parallel data storage
• Data Synchronizers
• Synchronous counter