74ACTQ374SC

74ACTQ374SC Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. There is a Tri-State, Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74ACTQ series. This D flip flop should not have a frequency greater than 85MHz. D latch consists of 1 elements. It consumes 40μA of quiescent current without being affected by external factors. This D latch belongs to the family of 74ACTQ374. A 4.5pFfarad input capacitance is provided by this T flip flop. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. In this device, the clock edge trigger type is Positive Edge. The flip flop is designed with 8bits. Its superior flexibility is attributed to its use of 8 circuits. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It is designed with 3 output lines. It is reported that there are 1 input lines. There is -24mA output current at the high level. There is no low level output current set at 24mA. A temperature below 85°Cis recommended for operation. It is recommended that the operating temperature be greater than -40°C. Normally, it operates with a voltage of 4.5VV as its minimum supply voltage. There is a maximum supply voltage of 5.5V. We are able to achieve a frequency of 85MHz.

74ACTQ374SC Features

Tube package
74ACTQ series
20 pins
8 Bits

74ACTQ374SC Applications

There are a lot of ON Semiconductor 74ACTQ374SC Flip Flops applications.

• Common Clocks
• Modulo – n – counter
• CMOS Process
• High Performance Logic for test systems
• Storage registers
• Communications
• Control circuits
• Frequency Dividers
• Automotive
• Functionally equivalent to the MC10/100EL29