74ACTQ374SJX

74ACTQ374SJX Overview

In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74ACTQ series. You should not exceed 85MHzin the output frequency of the device. There are 1 elements in it. There is a consumption of 40μAof quiescent energy. The 74ACTQ374 family contains it. Input capacitance of this device is 4.5pF farads. In this case, the electronic component is mounted in the way of Surface Mount. There are 20pins on it. It has a clock edge trigger type of Positive Edge. This flip flop is designed with 8 Bits. Using 8 circuits, it is highly flexible. If high efficiency is desired, the supply voltage should be kept at 5V. In order to operate, the chip has 3 output lines. A total of 1input lines have been provided. A -24mAis set for the high level output current. It is set to 24mAfor low level output current. Temperatures below 85°Care ideal for operating. Ideally, the operating temperature should be greater than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. 5.5Vis the maximum supply voltage it supports. This frequency can be achieved 85MHz.

74ACTQ374SJX Features

Tape & Reel (TR) package
74ACTQ series
20 pins
8 Bits

74ACTQ374SJX Applications

There are a lot of ON Semiconductor 74ACTQ374SJX Flip Flops applications.

• Buffer registers
• Clock pulse
• Cold spare funcion
• ESD protection
• Digital electronics systems
• Memory
• Frequency Divider circuits
• Data transfer
• Data storage
• Asynchronous counter