74ACTQ574SJ

74ACTQ574SJ Overview

It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74ACTQ series. This D flip flop should not have a frequency greater than 85MHz. There are 1 elements in it. As a result, it consumes 40μA quiescent current and is not affected by external forces. JK flip flop belongs to 74ACTQ574 family. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has Positive Edgeas its clock edge trigger type. Due to its superior flexibility, it uses 8 circuits. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 3output lines.

74ACTQ574SJ Features

Tube package
74ACTQ series
20 pins

74ACTQ574SJ Applications

There are a lot of ON Semiconductor 74ACTQ574SJ Flip Flops applications.

• Convert a momentary switch to a toggle switch
• Latch
• Differential Individual
• Consumer
• High Performance Logic for test systems
• CMOS Process
• Registers
• Frequency division
• Patented noise
• Automotive