74ACTQ74SJ

74ACTQ74SJ Overview

As a result, it is packaged as 14-SOIC (0.209, 5.30mm Width). You can find it in the Tubepackage. In the configuration, Differentialis used as the output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. Temperature is set to -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74ACTQ series. A frequency of 200MHzshould not be exceeded by its output. In total, it contains 2 elements. As a result, it consumes 20μA quiescent current and is not affected by external forces. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 4.5pF farads. In this case, the D flip flop belongs to the ACTfamily. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V.

74ACTQ74SJ Features

Tube package
74ACTQ series

74ACTQ74SJ Applications

There are a lot of Rochester Electronics, LLC 74ACTQ74SJ Flip Flops applications.

• Buffer registers
• Computing
• Dynamic threshold performance
• Load Control
• Registers
• Bus hold
• ESD performance
• Buffered Clock
• ESD protection
• Common Clocks