74ACTQ843SPC

74ACTQ843SPC Overview

The package in which it is embedded is named 24-DIP (0.300, 7.62mm). Tube is the packaging method. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Through Hole mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C. An FPGA in this series belongs to the 74ACTQ family. This electronic part is designed with 9 Bits. 74ACTQ843 is its family. 24 pins are used in its design. Through Hole is used to mount this electronic part. There are electronic circuits attached to the 9 input lines. Optimal efficiency requires 5V as the supply voltage. 3 output lines provide binary equivalents of input lines. This object is composed of 1 elements. The superior flexibility of the system is achieved through its use of 9 circuits. It is set to zero for the low level output current. It has been set to -24mA for the high level output current. Operating temperatures should be below 85°C. There should be a temperature above -40°C at which the device operates. Voltages up to 5.5V can be supplied. It operates with the minimal supply voltage of 4.5V.

74ACTQ843SPC Features

24-DIP (0.300, 7.62mm) package
74ACTQ series
9 Bits
74ACTQ843 family
24 pins
1 elements

74ACTQ843SPC Applications

There are a lot of ON Semiconductor 74ACTQ843SPC Latches applications.

• Bus system register with enable parallel lines at bus side
• Control circuits
• Decade counting
• Relay replacement
• Sample and hold register
• Counter
• Parallel-to-Serial Data Conversion
• Phase comparator
• Registers
• Avionics