74AHC377D,112

74AHC377D,112 Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is contained within the Tubepackage. As configured, the output uses Non-Inverted. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~5.5V. The operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74AHC series. There should be no greater frequency than 120MHzon its output. A total of 1 elements are present. During its operation, it consumes 4μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. If you search by 74AHC377, you will find similar parts. A voltage of 5V is used to power it. Input capacitance of this device is 3pF farads. This D flip flop belongs to the family of AHC. There is an electronic part mounted in the way of Surface Mount. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. 8bits are used in its design. For normal operation, the supply voltage (Vsup) should be above 2V. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

74AHC377D,112 Features

Tube package
74AHC series
20 pins
8 Bits

74AHC377D,112 Applications

There are a lot of Nexperia USA Inc. 74AHC377D,112 Flip Flops applications.

• Asynchronous counter
• Frequency Dividers
• Buffer registers
• Common Clocks
• Frequency division
• Control circuits
• Guaranteed simultaneous switching noise level
• Individual Asynchronous Resets
• EMI reduction circuitry
• Latch-up performance