74AHCT125S14-13

74AHCT125S14-13 Overview

Logical driver uses a neat 14-SOIC (0.154, 3.90mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). All of the 4 elements are put into use. Digital buffer is one of the 74AHCT series devices. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. The bus transceiver employs 1 bits for each element. In quiescent state, the electronic part uses 40μA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 4 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 8mA to its low level. In high level output mode, the electronic parts may conduct -8mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. Supplier device package of this electronic part would be 14-SO. It is sufficient to make 4 outputs. Digital buffer is characterized to have 8 inputs. Does the electronic component support schmitt trigger input? Yes.

74AHCT125S14-13 Features

High Level Output: 8mA
Low Level Output: -8mA

74AHCT125S14-13 Applications

There are a lot of Diodes Incorporated 74AHCT125S14-13 Buffers & Transceivers applications.

• Cable network front end
• Laser diode bonding
• IPTV front end
• Switching system
• Radio transmission
• Changeing the frequency from IF to RF
• Lamps
• Satellite communication
• Data center
• Wireless 3D game