74ALVCH16374TX

74ALVCH16374TX Overview

In the form of 48-TFSOP (0.240, 6.10mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. In the configuration, Tri-State, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74ALVCH series. A frequency of 150MHzshould be the maximum output frequency. The list contains 2 elements. There is 40μA quiescent consumption. The object belongs to the 74ALVCH16374 family. Its input capacitance is 6pFfarads. It is mounted in the way of Surface Mount. 48pins are included in its design. This device has Positive Edgeas its clock edge trigger type. It is designed with a number of bits of 16. Due to its superior flexibility, it uses 16 circuits. It is designed with 3 output lines. The number of input lines is 8. -24mA is set as the high level output current. 24mAis set as the low level output current. Temperatures below 85°Care ideal for operating. In order for the system to operate properly, the temperature should be higher than -40°C. Initially, it requires a voltage of 1.65V as the minimum supply voltage. In this case, it supports a maximum supply voltage of 3.6V. The frequency that can be achieved is 150MHz.

74ALVCH16374TX Features

Tape & Reel (TR) package
74ALVCH series
48 pins
16 Bits

74ALVCH16374TX Applications

There are a lot of ON Semiconductor 74ALVCH16374TX Flip Flops applications.

• Circuit Design
• Control circuits
• Latch-up performance
• Digital electronics systems
• Count Modes
• Shift Registers
• Automotive
• Common Clocks
• Buffered Clock
• Clock pulse