74CBTLV3257PWRG4

74CBTLV3257PWRG4 Overview

Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.By maintaining the operating temperature at -40°C~85°C TA, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBTLV series can be used for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74CBTLV3257, so you can find its logic switch related parts using that number.The turn signal switch is supplied with a voltage of 2.5V volts.There are 16 component pins in this turn signal switch.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.A total of 16 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The CBTLV/3B family includes the logic switch.Vsup should be kept at 2.3V to prevent some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 2.5/3.3V.As a result, the turn signal switch consists of 2 outputs.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.It consumes 10μA current of multiplexer ic without external influences.It is provided with 8 inputs.The switches package is packaged in a way which is consistent with TR.It operates with a resistance of 5Ohm.A total of 4 channels are used for transmission in the turn signal switch's circuit.In mux switch configuration, there are 1 elements.It is possible to maintain stability of the multiplexers if the supply voltage to the load is set at 10μA.

74CBTLV3257PWRG4 Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 10μA

74CBTLV3257PWRG4 Applications

There are a lot of Texas Instruments 74CBTLV3257PWRG4 Signal Switches / Multiplexers / Decoders applications.

• Analog, digital or video signal switching
• Textile mills
• To select different devices in microprocessor output
• High-performance memory-decoding applications
• Encrypted communications system
• Speed synchronization of multiple motors in industries
• Speed control of medern motors
• GLAN
• Memory chips
• Microprocessor memory systems