74F109SJ

74F109SJ Overview

The flip flop is packaged in 16-SOIC (0.209, 5.30mm Width). A package named Tubeincludes it. T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at 0°C~70°C TA. The type of this D latch is JK Type. In this case, it is a type of FPGA belonging to the 74F series. You should not exceed 125MHzin the output frequency of the device. A total of 2 elements are present. As a result, it consumes 17mA quiescent current. It is a member of the 74F109 family. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. It has a clock edge trigger type of Positive Edge. The flip flop is designed with 1bits. Using 2 circuits, it is highly flexible. High efficiency requires the supply voltage to be maintained at 5V. To operate, the chip has a total of 3 output lines. This input has 2lines in it. It is set to -1mAfor the high level output current. The low level output current is set to 20mA. Ideally, the operating temperature should be lower than 70°C. Operating temperatures should be above 0°C. The minimal supply voltage is 4.5V. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 125MHz.

74F109SJ Features

Tube package
74F series
16 pins
1 Bits

74F109SJ Applications

There are a lot of ON Semiconductor 74F109SJ Flip Flops applications.

• Common Clocks
• Buffered Clock
• EMI reduction circuitry
• Counters
• Storage registers
• Shift Registers
• Functionally equivalent to the MC10/100EL29
• Individual Asynchronous Resets
• Shift registers
• Buffer registers