74F11SC

74F11SC Overview

The part comes in 14-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. It works based on the AND Gate logic principle. It is necessary to ensure the full functionality of the part by providing a voltage of 4.5V~5.5V. Temperatures around 0°C~70°C are extended for operation. In Surface Mount, the part is mounted. There is 1mA 20mA output current in the high or low states. There are several in the 74F series. If you are looking for device variants, try search with 74F11. The logic device can be mounted on the Surface Mount axis and is used in a wide range of applications. Datasheets for 14 pin functions are available upon request. Inputs are limited to 3. Parts that are quiescent have 6.5mA current flowing through them. A total of 3 circuits make up this device. This device has 1 outputs. For operation, 3 elements are used. It is specified in the operating instructions of the chip that the operating voltage will be 5V volts. A logical operation through a gate of 3. There is a package called 14-SOIC offered by suppliers. If the temperature exceeds 70°C, the device should not be operated. As determined by test statistics, the part would operate at 0°C. normally, users should not supply the device with voltage higher than 5.5V. In general, it is recommended to use 4.5V as the part's lowest voltage.

74F11SC Features

AND Gate Logic Type
Operating Temperature: 0°C~70°C
Quiescent Current: 6.5mA
3 Gates

74F11SC Applications

There are a lot of ON Semiconductor 74F11SC Gates and Inverters applications.

• Projector
• Residual current/leakage current protection
• Roof distributed power station
• Communication
• Photovoltaic grid-connected power system
• Urban rail vehicle
• Solar street light
• VCR
• Cell phone
• Laptop