74F273SC

74F273SC Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tubepackage. The output it is configured with uses Non-Inverted. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74Fseries of FPGAs. There should be no greater frequency than 160MHzon its output. A total of 1elements are present in it. As a result, it consumes 44mA quiescent current. JK flip flop belongs to 74F273 family. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 20. This device has Positive Edgeas its clock edge trigger type. In order to achieve its superior flexibility, 8 circuits are used. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It is designed with 3 output lines.

74F273SC Features

Tube package
74F series
20 pins

74F273SC Applications

There are a lot of ON Semiconductor 74F273SC Flip Flops applications.

• Patented noise
• Single Down Count-Control Line
• Common Clocks
• Safety Clamp
• Digital electronics systems
• Set-reset capability
• Automotive
• 2 – Bit synchronous counter
• ESD performance
• Power down protection