74F374SJ

74F374SJ Overview

The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. You can find it in the Tubepackage. This output is configured with Tri-State, Non-Inverted. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74F series. Its output frequency should not exceed 140MHz Hz. In total, it contains 1 elements. During its operation, it consumes 86mA quiescent energy. The 74F374 family contains it. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device's clock edge trigger type is Positive Edge. It is designed with a number of bits of 8. Due to its superior flexibility, it uses 8 circuits. Optimal efficiency requires a supply voltage of 5V. The JK flip flop is with 3 output lines to operate. Currently, there are 8 lines of input. It is set to -3mAfor the high level output current. A 24mAvalue is set for low-level output current. If the operating temperature is lower than 70°C, it is recommended. Operating temperatures should be above 0°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. 5.5Vis its maximum supply voltage. This can be achieved at a frequency of 140MHz.

74F374SJ Features

Tube package
74F series
20 pins
8 Bits

74F374SJ Applications

There are a lot of ON Semiconductor 74F374SJ Flip Flops applications.

• EMI reduction circuitry
• Convert a momentary switch to a toggle switch
• Frequency division
• Synchronous counter
• Supports Live Insertion
• Buffer registers
• Power down protection
• Registers
• Dynamic threshold performance
• Shift registers