74F533PC

74F533PC Overview

In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Tube is the packaging method. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Through Hole, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. In the 74F series, this FPGA is located. The design of this electronic part is based on 8 bits. This type belongs to the 74F533 family. The device has 20 pins. The electronic part is mounted using the Through Hole method. It consists of 2 input lines from which an electronic circuit can be built. For maximum efficiency, the supply voltage should be set to 5V. A binary equivalent of the input line is generated by the 8 output lines. It consumes 41mA current from its quiescent state without being affected by external factors at all. A total of 1 elements make up this object. Its superior flexibility is achieved by using 8 circuits. 3mA represents the low level output current. It is set to zero for the high level output current. A temperature below 70°C should be used for operation. It is recommended that the operating temperature be higher than 0°C. Voltages up to 5.5V can be supplied. In order for the machine to operate, the supply voltage must be 4.5V.

74F533PC Features

20-DIP (0.300, 7.62mm) package
74F series
8 Bits
74F533 family
20 pins
1 elements

74F533PC Applications

There are a lot of ON Semiconductor 74F533PC Latches applications.

• Watches
• Buffer/Storage Registers
• Decade counting
• Audio and video switching
• Synchronous frequency dividers
• Parallel data storage
• BCD counting
• Timers
• Counting
• Phase comparator