74F533SJ

74F533SJ Overview

20-SOIC (0.209, 5.30mm Width) contains it. The package is in the form of Tube. In its configuration, Tri-State is used as the output. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. It operates at a voltage of 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. The 74F series contains FPGAs of this type. With this electronic part, there are 8 bits. It belongs to 74F533 family. It is designed with 20 pins. It is mounted according to the Surface Mount method. It consists of 2 input lines from which an electronic circuit can be built. High efficiency requires a voltage supply of 5V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are 1 elements in it. 8 circuits are used to achieve superior flexibility. In the low level output current, the value is set to 3mA. -3mA represents the high level output current. Ideally, the operating temperature should be lower than 70°C. Temperatures above 0°C should be used. There is a maximum voltage of 5.5V supported. With a voltage of 4.5V, it operates at its minimum capacity.

74F533SJ Features

20-SOIC (0.209, 5.30mm Width) package
74F series
8 Bits
74F533 family
20 pins
1 elements

74F533SJ Applications

There are a lot of ON Semiconductor 74F533SJ Latches applications.

• Storage
• Avionics
• BCD counting
• Parallel Input
• Hammer Device Information
• Pattern generators
• Multi-line decoders
• Instrumentation
• Hammer
• Four-bit storage with output enable