74F543SPC

74F543SPC Overview

Logical driver uses a neat 24-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 3mA 24mA; 3mA 64mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74F series devices. Buffer IC is suitable for Through Hole applications. Logical driver has 24 pins. The bus transceiver employs 8 bits for each element. You can search "74F543" for other related electrical components. In quiescent state, the electronic part uses 83mA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. 8 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as 0°C. Digital buffer should operate with ambient temperature no higher than 70°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct 64mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. Supplier device package of this electronic part would be 24-PDIP. The fundamental operation of logical driver is based on 8 circuits.

74F543SPC Features

High Level Output: 64mA
Low Level Output: 64mA

74F543SPC Applications

There are a lot of ON Semiconductor 74F543SPC Buffers & Transceivers applications.

• Interconnection between switches and computers
• Data center
• Vehicle, ship, aircraft navigation and positioning
• AV receiver
• Ethernet circuitry
• Cable network front end
• Wireless security systems
• Metro access rings
• Digital systems
• interconnection between switches