74F573PC

74F573PC Overview

There is an embedded version of it in package 20-DIP (0.300, 7.62mm). Tube is the way it is packaged. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Through Hole method. The supply voltage of the device is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. An FPGA of this type belongs to the 74F series. The design of this electronic part is based on 8 bits. The family it belongs to is 74F573. In addition, it is designed with a pin number of 20. Through Hole is used to mount this electronic part. Input Lines consist of electronic circuits, and there are 2. The 24mA output current gives it maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. A binary equivalent of the input line is generated by the 8 output lines. It consumes 35mA of quiescent current without being affected by outside factors. The element count is 1. In order to achieve its superior flexibility, 8 circuits are used. 3mA represents the low level output current. It is set to zero for the high level output current. Operating temperatures should be below 70°C. It is recommended to operate at a temperature higher than 0°C. There is a maximum supply voltage of 5.5V supported by this device. This device requires a minimum voltage of 4.5V.

74F573PC Features

20-DIP (0.300, 7.62mm) package
74F series
8 Bits
74F573 family
20 pins
1 elements

74F573PC Applications

There are a lot of ON Semiconductor 74F573PC Latches applications.

• Pseudo-random code generators
• Relay replacement
• Parallel data storage
• High-speed logic
• Flip-flops
• Automatic test equipment
• Counter control
• Parallel-to-Serial Data Conversion
• Bus system register with enable parallel lines at bus side
• Registers