74F825SCX

74F825SCX Overview

The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. It is included in the package Tape & Reel (TR). This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. Currently, the operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74F series. Its output frequency should not exceed 160MHz Hz. There are 1 elements in it. As a result, it consumes 90mA of quiescent current without being affected by external factors. The 74F825family includes it. It is mounted in the way of Surface Mount. A total of 24pins are provided on this board. It has a clock edge trigger type of Positive Edge. 8bits are used in its design. The superior flexibility of this product is achieved by using 8 circuits. Optimal efficiency requires a supply voltage of 5V. To operate, the chip has a total of 1 output lines. A total of 2input lines have been provided. -3mA is set as the high level output current. It is set to 24mAfor low level output current. Temperatures below 70°Care ideal for operating. The operating temperature should be higher than 0°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis its maximum supply voltage. 160MHzis the maximum frequency that can be achieved.

74F825SCX Features

Tape & Reel (TR) package
74F series
24 pins
8 Bits

74F825SCX Applications

There are a lot of ON Semiconductor 74F825SCX Flip Flops applications.

• Dynamic threshold performance
• Convert a momentary switch to a toggle switch
• Digital electronics systems
• Data storage
• Instrumentation
• ESCC
• Balanced Propagation Delays
• Computers
• Safety Clamp
• Single Up Count-Control Line