74F825SPC

74F825SPC Overview

As a result, it is packaged as 24-DIP (0.300, 7.62mm). It is included in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. It is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. In this case, the operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74F series. A frequency of 160MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 90mA quiescent current and is not affected by external forces. There have been 24 terminations. It is powered from a supply voltage of 5V. Electronic devices of this type belong to the F/FASTfamily. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. The flip flop contains 2ports. Additionally, there are WITH TRIPLE OUTPUT ENABLE on the electronic flip flop that can be referred to.

74F825SPC Features

Tube package
74F series

74F825SPC Applications

There are a lot of Rochester Electronics, LLC 74F825SPC Flip Flops applications.

• Parallel data storage
• Computing
• Frequency Divider circuits
• Counters
• Cold spare funcion
• Modulo – n – counter
• Frequency Dividers
• Single Down Count-Control Line
• Count Modes
• Balanced 24 mA output drivers