74F843SPC

74F843SPC Overview

The package in which it is embedded is named 24-DIP (0.300, 7.62mm). Tube is the way in which it is packaged. There is a Tri-State output configured. This electrical device has Logic type D-Type Transparent Latch. This electronic part is mounted in the way of Through Hole. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The temperature at which the machine is operating is 0°C~70°C. In the 74F series, this FPGA is located. This type belongs to the 74F843 family. With the design of the board, there are only 24 pins. Through Hole is the way in which this electronic part is mounted. It contains 2 input lines where electronic circuits are present. Input lines are converted into binary equivalents by 1 output lines. Without external influences, it consumes 65mA quiescent current. To achieve its exceptional flexibility, it relies on 1 circuits. 3mA is set as the low level output current. 24mA is the high level output current. Ideally, the operating temperature should be lower than 70°C. Temperatures higher than 0°C should be used for operation. There is a maximum supply voltage of 5.5V supported by this device. With a voltage of 4.5V, it operates at its minimum capacity.

74F843SPC Features

24-DIP (0.300, 7.62mm) package
74F series
74F843 family
24 pins

74F843SPC Applications

There are a lot of ON Semiconductor 74F843SPC Latches applications.

• Relay replacement
• Pseudo-random code generators
• PCs and Notebooks
• Counter control
• Shift register
• Pattern Generators
• Shift right with parallel loading
• Double bus register system
• Sample and hold register
• Automotive Infotainment