74FCT162374ATPVCT

74FCT162374ATPVCT Overview

The package is in the form of 48-BSSOP (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74FCTseries contain this type of chip. The list contains 2 elements. There is a consumption of 500μAof quiescent energy. 48terminations have occurred. The 74FCT162374 family contains it. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 4.5pF farads. An electronic device belonging to the family FCTcan be found here. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 48. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. The flip flop is designed with 16bits. 1 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. The flip flop contains 2ports. The supply voltage should be maintained at 5V for high efficiency. This T flip flop features a maximum design flexibility due to its output current of 24mA. There are 8 output lines in this JK flip flop.

74FCT162374ATPVCT Features

Tape & Reel (TR) package
74FCT series
48 pins
16 Bits
5V power supplies

74FCT162374ATPVCT Applications

There are a lot of Texas Instruments 74FCT162374ATPVCT Flip Flops applications.

• Synchronous counter
• Storage Registers
• Single Down Count-Control Line
• Storage registers
• Memory
• Single Up Count-Control Line
• Test & Measurement
• Event Detectors
• High Performance Logic for test systems
• QML qualified product