74FCT162501CTPAG8

74FCT162501CTPAG8 Overview

The package TSSOP includes it as part of its contents. It is packaged in the way of Tape & Reel (TR). The 56 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. When the supply voltage is above 5V, the device will operate normally. There are 56 pins on it. A 18-Bit electronic part was designed for this application. Transmission lines are terminated with 2 terminations, which are devices matching the line's characteristic impedance. Surface Mount is used to mount this electronic part. 56 pins are used in the design of this board. This electronic device belongs to the family of FCT. Powered by 5V power supplies, it runs on a battery. 1 elements make up the structure. The trigger it is configured with uses POSITIVE EDGE. Due to the reliable performance of the device, it is well suited for TAPE AND REEL. Channel number is increasing/declining: 18. It is important to note that this electrical part operates from a supply voltage of 5V. There is no external influence on how it consumes 500μA of quiescent current. It is operated by a voltage of 4.5V as the minimum supply voltage. The voltage at which 5.5V can be supplied is maximal. As a result of this, 24mA is the current that is being output at high levels. It is recommended that the operating temperature be higher than -40°C. In an ideal world, the operating temperature should be lower than 85°C.

74FCT162501CTPAG8 Features

TSSOP package
56 pin count
56 pins
5V power supplies
1 elements

74FCT162501CTPAG8 Applications

There are a lot of Integrated Device Technology (IDT) 74FCT162501CTPAG8 Universal Bus Functions applications.

• measuring instrument
• Sewing machine
• Electric grinding wheel
• Automatic watering system
• Automatic digital control circuits
• Urban rail vehicle
• Embedded system
• Automotive voltage monitoring
• Networking
• Hair dryer