74FCT163373CPAG

74FCT163373CPAG Overview

The TSSOP package contains it. Electronic parts with 8 bits are designed for this application. The device consists of 48 terminations that are designed to be used in conjunction with it. The device works with a voltage of 3.3V for its supply voltage. It is equipped with 48 pin count. This electronic device belongs to the family of FCT. It is designed with 48 pins. The electronic part is mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. It contains 16 input lines where electronic circuits are present. As a result of its reliable performance, it is well suited for TUBE. The supply voltage should be maintained at 3.3V for high efficiency. Aquiescent current is consumed by 10μA without being affected by external forces. This object is composed of 2 elements. MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V are also a characteristic of it. 24mA represents the low level output current. There is -8mA output current at the high level. Ideally, the temperature should not be higher than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. There is a maximum supply voltage of 3.6V supported by this device. The minimal supply voltage is 2.7V. It uses the logic IC BUS DRIVER.

74FCT163373CPAG Features

TSSOP package
8 Bits
48 pin count
48 pins
2 elements

74FCT163373CPAG Applications

There are a lot of Integrated Device Technology (IDT) 74FCT163373CPAG Latches applications.

• Audio and video switching
• Automotive Body Electronics
• Buffer Storage
• Lamp and Display (LED)
• Buffer/Storage Registers
• Flip-flops
• Stacked or Push-Down Registers
• Hammer Device Information
• Parallel Input
• BCD counting