74FCT573CTQG8

74FCT573CTQG8 Overview

In the QSOP package, it is embedded. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With the supply voltage set at 5V, it is able to operate. With 20 pins, it is equipped. It is a member of the FCT family of electronic devices. The 20 pins are designed into it. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. 5V power supplies are needed to operate it. As a result of its reliable performance, it is well suited for TAPE AND REEL. In order to achieve high efficiency, the supply voltage should be kept at 5V. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. There is 15mA low level output current set. 48mA represents the high level output current. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used as the operating temperature. Voltages up to 5.25V can be supplied. There is a minimum supply voltage of 4.75V for it. It uses a logic IC of type BUS DRIVER.

74FCT573CTQG8 Features

QSOP package
8 Bits
20 pin count
20 pins
5V power supplies

74FCT573CTQG8 Applications

There are a lot of Integrated Device Technology (IDT) 74FCT573CTQG8 Latches applications.

• BCD counting
• Relay replacement
• Automotive Body Electronics
• Parallel Input
• Digital bus buffer
• Up/down difference counting
• Relay
• Stacked or Push-Down Registers
• Pattern generators
• Phase comparator