74HC374PW,112

74HC374PW,112 Overview

The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. It is contained within the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. A voltage of 2V~6Vis required for its operation. It is operating at a temperature of -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop is a part of the 74HCseries of FPGAs. You should not exceed 83MHzin its output frequency. A total of 1elements are contained within it. It consumes 4μA of quiescent The number of terminations is 20. You can search similar parts based on 74HC374. It is powered from a supply voltage of 5V. This JK flip flop has a 3.5pFfarad input capacitance. HC/UHis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. There is a clock edge trigger type of Positive Edgeon this device. There are 8bits in its design. In this case, the maximum supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. A D flip flop with 2embedded ports is available. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. As of now, there are 8input lines. As a result, it consumes 8μA of quiescent current without being affected by external factors.

74HC374PW,112 Features

Tube package
74HC series
20 pins
8 Bits

74HC374PW,112 Applications

There are a lot of Nexperia USA Inc. 74HC374PW,112 Flip Flops applications.

• Divide a clock signal by 2 or 4
• Convert a momentary switch to a toggle switch
• Synchronous counter
• QML qualified product
• Shift Registers
• Supports Live Insertion
• Storage Registers
• Load Control
• Set-reset capability
• ESCC