74HC40103PW,118

74HC40103PW,118 Overview

In the 16-TSSOP (0.173, 4.40mm Width)package, it is supplied. The configuration of this device is based on 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The device contains 1terminations. There are a total of 16 pins in all components. As [0], it is packaged. A circuit is connected to other components by 16pins. Using [0], it can be mounted. It is included in the HC/UHfamily. With its 74HCseries designation, it can be used for a range of applications. Binary Counteris adopted as the logic type. Ideally, the operating temperature should be set to -40°C~125°C. Using a Surface Mountmounting type, it is mounted. Providing a voltage of 2V~6Vensures higher reliability of operation. There are 8 bits stored in each element of the array. It is important to note that in regards to this electronic device, TCO OUTPUT; RESET TO MAX COUNTis an extremely significant feature. Further related parts may be found under the base part number 74HC40103. In order for it to operate, it requires a supply voltage of 5V . The minimum supply voltage (Vsup) is 2V. It is possible to provide a voltage up to 6V (Vsup). During quiescent mode, it consumes 8μA current.

74HC40103PW,118 Features

Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
8 bits per element
TCO OUTPUT; RESET TO MAX COUNT
Operating supply voltage of 5V

74HC40103PW,118 Applications

There are a lot of Nexperia USA Inc. 74HC40103PW,118 Counters & Dividers applications.

• Binary counter/decoder
• POWER COMPUTATION
• ANALOG SIGNAL PROCESSING
• Time-delay circuits
• Timing applications
• SQUARING
• Communications Digital Frequency Synthesizers;
• Frequency division
• VHF, UHF, FM, AM, etc.
• SQUARE ROOT