74LCX162374MTD

74LCX162374MTD Overview

The item is packaged in 48-TFSOP (0.240, 6.10mm Width)cases. There is an embedded version in the package Tube. T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74LCXseries of FPGAs. You should not exceed 170MHzin the output frequency of the device. Despite external influences, it consumes 20μAof quiescent current. This D latch belongs to the family of 74LCX162374. This T flip flop has a capacitance of 7pF farads at the input. It is mounted by the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. This flip flop is designed with 16 Bits. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 2input lines have been provided.

74LCX162374MTD Features

Tube package
74LCX series
48 pins
16 Bits

74LCX162374MTD Applications

There are a lot of ON Semiconductor 74LCX162374MTD Flip Flops applications.

• EMI reduction circuitry
• Latch-up performance
• ESCC
• Frequency Divider circuits
• Shift Registers
• Power down protection
• Memory
• Safety Clamp
• Test & Measurement
• Common Clocks