74LCX74MTCX

74LCX74MTCX Overview

The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Differentialas the output. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at 2V~3.6Vvolts. A temperature of -40°C~85°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74LCX series. It should not exceed 150MHzin its output frequency. 14terminations have occurred. You can search similar parts based on 74LCX74. A voltage of 2.5V is used to power it. The input capacitance of this T flip flop is 7pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the LVC/LCX/Zfamily. It is mounted by the way of Surface Mount. The 14pins are designed into the board. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. Vsup reaches 3.6V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 2V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. In order for the device to operate, it requires 3.3V power supplies. There is 10μA quiescent current consumption by it. A total of 2 channels are available.

74LCX74MTCX Features

Tape & Reel (TR) package
74LCX series
14 pins
3.3V power supplies

74LCX74MTCX Applications

There are a lot of ON Semiconductor 74LCX74MTCX Flip Flops applications.

• Synchronous counter
• Circuit Design
• Asynchronous counter
• Registers
• Pattern generators
• High Performance Logic for test systems
• Control circuits
• ESCC
• Computing
• Divide a clock signal by 2 or 4