74LCX821MTCX

74LCX821MTCX Overview

The package is in the form of 24-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. A temperature of -40°C~85°C TAis used in the operation. A flip flop of this type is classified as a D-Type. It belongs to the 74LCXseries of FPGAs. You should not exceed 150MHzin its output frequency. The 74LCX821 family contains this object. The input capacitance of this T flip flop is 7pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 24 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The JK flip flop is with 3 output lines to operate. 1input lines are available for you to choose from. Despite external influences, it consumes 10μAof quiescent current.

74LCX821MTCX Features

Tape & Reel (TR) package
74LCX series
24 pins

74LCX821MTCX Applications

There are a lot of ON Semiconductor 74LCX821MTCX Flip Flops applications.

• Convert a momentary switch to a toggle switch
• EMI reduction circuitry
• Storage Registers
• Functionally equivalent to the MC10/100EL29
• Circuit Design
• Matched Rise and Fall
• Balanced Propagation Delays
• Buffer registers
• ATE
• Storage registers