74LVC138APW-Q100J

74LVC138APW-Q100J Overview

In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 1.2V~3.6V voltage.Several applications are possible for 74LVC series multiplexers.Among its basic configurations are 16 terminations.The base part number is 74LVC138, which can also be used to find its logic switch related parts.In multiplexer's system, 1.8V is the voltage supplied.In this turn signal switch, there are 16 components that can be connected to each pin.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.Currently, it is configured with a 16 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of LVC/LCX/Z the logic switch is a member.No external influence consumes 10μA current of multiplexer ic.On the multiplexers, 3 input lines are provided for accepting voltage levels.There are 8 output lines on the signal source.

74LVC138APW-Q100J Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
3 input lines
8 output lines

74LVC138APW-Q100J Applications

There are a lot of Nexperia USA Inc. 74LVC138APW-Q100J Signal Switches / Multiplexers / Decoders applications.

• Microprocessor instruction decoding
• Data transfer
• A robotic vehicle with the metal detector
• Make full adder
• Relay
• Arithmetic Logic Units
• Enabling different rows of memory depending on address in memory chips
• Microprocessor memory systems
• Data communication
• Paper plants