74LVC1G175GV-Q100H

74LVC1G175GV-Q100H Overview

SC-74, SOT-457is the packaging method. It is included in the package Tape & Reel (TR). In the configuration, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. In the operating environment, the temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74LVCseries of FPGAs. It should not exceed 200MHzin its output frequency. As a result, it consumes 40μA quiescent current and is not affected by external forces. There are 6 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74LVC1G175 family. The D flip flop is powered by a voltage of 3.3V . This T flip flop has a capacitance of 2.5pF farads at the input. This D flip flop belongs to the family of LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The design is based on 1bits. Vsup reaches 5.5V, the maximal supply voltage. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It consumes 10μA of quiescent current without being affected by external factors.

74LVC1G175GV-Q100H Features

Tape & Reel (TR) package
74LVC series
1 Bits

74LVC1G175GV-Q100H Applications

There are a lot of Nexperia USA Inc. 74LVC1G175GV-Q100H Flip Flops applications.

• Registers
• Single Up Count-Control Line
• Memory
• Buffered Clock
• Communications
• Clock pulse
• Supports Live Insertion
• Circuit Design
• Functionally equivalent to the MC10/100EL29
• Data Synchronizers