74LVC1G175GV,125

74LVC1G175GV,125 Overview

The flip flop is packaged in SC-74, SOT-457. There is an embedded version in the package Tape & Reel (TR). The output it is configured with uses Non-Inverted. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~5.5V volts. In this case, the operating temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74LVC series. There should be no greater frequency than 200MHzon its output. In total, there are 1 elements. There is 40μA quiescent consumption. In 6terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LVC1G175 family contains this object. Power is provided by a 2.7V supply. The input capacitance of this T flip flop is 2.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family LVC/LCX/Zcan be found here. A total of 6pins are provided on this board. There are 1bits in this flip flop. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). In addition to its maximum design flexibility, the output current of the T flip flop is 50mA.

74LVC1G175GV,125 Features

Tape & Reel (TR) package
74LVC series
6 pins
1 Bits

74LVC1G175GV,125 Applications

There are a lot of Nexperia USA Inc. 74LVC1G175GV,125 Flip Flops applications.

• Clock pulse
• Single Down Count-Control Line
• ESD performance
• Frequency Divider circuits
• Communications
• Memory
• Test & Measurement
• 2 – Bit synchronous counter
• Consumer
• Shift registers