74LVC2G74DP-Q100H

74LVC2G74DP-Q100H Overview

The flip flop is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). The Tape & Reel (TR)package contains it. In the configuration, Differentialis used as the output. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 1.65V~5.5Vsupply voltage is required for it to operate. It is operating at -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74LVC series. In order for it to function properly, its output frequency should not exceed 200MHz. The element count is 1 . In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74LVC2G74. A voltage of 1.8V is used as the power supply for this D latch. There is 4pF input capacitance for this T flip flop. It is a member of the LVC/LCX/Zfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. This device's clock edge trigger type is Positive Edge. 1bits are used in its design. The maximal supply voltage (Vsup) reaches 5.5V. Quiescent current is consumed by the D latch in the amount of 40μA.

74LVC2G74DP-Q100H Features

Tape & Reel (TR) package
74LVC series
8 pins
1 Bits

74LVC2G74DP-Q100H Applications

There are a lot of Nexperia USA Inc. 74LVC2G74DP-Q100H Flip Flops applications.

• Control circuits
• Bounce elimination switch
• Storage Registers
• Frequency Divider circuits
• Frequency division
• Counters
• Shift registers
• High Performance Logic for test systems
• Event Detectors
• Load Control