74LVCH16374ADLRG4

74LVCH16374ADLRG4 Overview

In the form of SSOP, it has been packaged. It is included in the package Tape & Reel (TR). 48terminations have occurred. The D flip flop is powered by a voltage of 1.8V . Devices in the LVC/LCX/Zfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. It is designed with 48 pins. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. 16bits are used in its design. The superior flexibility of this product is achieved by using 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. A D flip flop with 2embedded ports is available. In order for the chip to function, it has 3output lines. This input has 8lines in it. Quiescent current is consumed by the D latch in the amount of 20μA. A -24mAvalue is set for the high level output current. Low level output current is set to 24mA. A temperature below 125°Cshould be used for operation. Operating temperatures should be above -40°C. The system operates with a minimum supply voltage of 1.65V. 3.6Vis its maximum supply voltage. It is possible to obtain a frequency of 150MHz. It uses BUS DRIVERas its logic IC. There are 2 functions available on the JK flip flop. The D latch is equipped with 48 pins. In addition to its maximum design flexibility, the output current of the flip flop is 24mA.

74LVCH16374ADLRG4 Features

Tape & Reel (TR) package
48 pins
16 Bits
2 Functions
48 pin count

74LVCH16374ADLRG4 Applications

There are a lot of Texas Instruments 74LVCH16374ADLRG4 Flip Flops applications.

• CMOS Process
• Shift registers
• Asynchronous counter
• Automotive
• Frequency Divider circuits
• Consumer
• 2 – Bit synchronous counter
• ESCC
• EMI reduction circuitry
• Safety Clamp