74LVQ374SC

74LVQ374SC Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. The package Tubecontains it. The output it is configured with uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at 2V~3.6Vvolts. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The FPGA belongs to the 74LVQ series. There should be no greater frequency than 75MHzon its output. In total, it contains 1 elements. During its operation, it consumes 40μA quiescent energy. JK flip flop belongs to 74LVQ374 family. There is 4.5pF input capacitance for this T flip flop. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. It is designed with a number of bits of 8. Due to its superior flexibility, it uses 8 circuits. There are no output lines on the JK flip flop. As of now, there are 1input lines. The high level output current is set to -12mA. A 12mAvalue is set for low-level output current. If the operating temperature is lower than 85°C, it is recommended. Ideally, the operating temperature should be greater than -40°C. The minimum voltage required for operation is 2V. It is capable of supporting a maximum supply voltage of 3.6V. It is possible to achieve 75MHz frequencies.

74LVQ374SC Features

Tube package
74LVQ series
20 pins
8 Bits

74LVQ374SC Applications

There are a lot of ON Semiconductor 74LVQ374SC Flip Flops applications.

• Consumer
• Buffer registers
• Common Clocks
• Storage Registers
• Control circuits
• ESD performance
• Test & Measurement
• Functionally equivalent to the MC10/100EL29
• Patented noise
• ESD protection