74LVT162374DGG,112

74LVT162374DGG,112 Overview

The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). The package Tubecontains it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. A 2.7V~3.6Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74LVT series. You should not exceed 150MHzin its output frequency. In total, it contains 2 elements. As a result, it consumes 120μA quiescent current. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74LVT162374. Power is supplied from a voltage of 3.3V volts. The input capacitance of this JK flip flopis 3pF farads. A device of this type belongs to the family of LVT. In this case, the electronic component is mounted in the way of Surface Mount. The 48pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There are 16bits in this flip flop. Vsup reaches 3.6V, the maximal supply voltage. The D flip flop has no ports embedded. High efficiency requires the supply voltage to be maintained at 3.3V.

74LVT162374DGG,112 Features

Tube package
74LVT series
48 pins
16 Bits

74LVT162374DGG,112 Applications

There are a lot of Nexperia USA Inc. 74LVT162374DGG,112 Flip Flops applications.

• Automotive
• Dynamic threshold performance
• Frequency Divider circuits
• Balanced 24 mA output drivers
• Data Synchronizers
• Control circuits
• Data storage
• Frequency Dividers
• Divide a clock signal by 2 or 4
• High Performance Logic for test systems