74LVT16373MTDX

74LVT16373MTDX Overview

The 48-TFSOP (0.240, 6.10mm Width) package contains it. Tape & Reel (TR) is the way it is packaged. The output it is configured with uses Tri-State. There is a logic type of D-Type, Addressable associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates with a supply voltage of 2.7V~3.6V. It operates at -40°C~85°C degrees Celsius. In the 74LVT series, this FPGA is located. The electronic part in this image has 16 bits. There is no doubt that it belongs to the family 74LVT16373. The 48 pins are designed into it. Surface Mount is the method used for mounting this electronic part. There are 4 input lines in which electronic circuits are present. Optimal efficiency requires 3.3V as the supply voltage. It follows that 3 output lines are generated from the binary equivalent of the input line. In total, it has 2 elements. The circuit's superior flexibility is achieved through the use of 2 circuits. 64mA is set as the low level output current. -32mA is set as the high level output current. The operating temperature should be lower than 85°C. A temperature greater than -40°C should be used as the operating temperature. The supply voltage is limited to 3.6V. A voltage of 2.7V is the minimum supply voltage required for it to operate.

74LVT16373MTDX Features

48-TFSOP (0.240, 6.10mm Width) package
74LVT series
16 Bits
74LVT16373 family
48 pins
2 elements

74LVT16373MTDX Applications

There are a lot of ON Semiconductor 74LVT16373MTDX Latches applications.

• Shift left register
• Automatic test equipment
• Programmable binary
• Counter
• Clocks
• A/D and D/A conversion
• Registers
• Digital bus buffer
• Parallel Input
• General-Purpose Register