74LVT16374ADGG,112

74LVT16374ADGG,112 Overview

The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). A package named Tubeincludes it. T flip flop uses Tri-State, Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LVTseries FPGA. You should not exceed 150MHzin the output frequency of the device. In total, there are 2 elements. It consumes 120μA of quiescent 48terminations have occurred. It is a member of the 74LVT16374 family. The power source is powered by 3.3V. Its input capacitance is 3pF farads. LVTis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. An electronic part with 16bits has been designed. Vsup reaches its maximum value at 3.6V. The D flip flop is embedded with 2ports. The supply voltage should be maintained at 3.3V for high efficiency. In terms of quiescent current, it consumes 4mA .

74LVT16374ADGG,112 Features

Tube package
74LVT series
48 pins
16 Bits

74LVT16374ADGG,112 Applications

There are a lot of Nexperia USA Inc. 74LVT16374ADGG,112 Flip Flops applications.

• Data transfer
• Data storage
• Reduced system switching noise
• Buffered Clock
• Computing
• Convert a momentary switch to a toggle switch
• Matched Rise and Fall
• Communications
• Divide a clock signal by 2 or 4
• Buffer registers