74LVTH162373DGGRE4

74LVTH162373DGGRE4 Overview

The package in which it is embedded is named TSSOP. Tape and Reel is the way in which it is packaged. The design of this electronic part is based on 8 bits. This device has been designed with 48 terminations available. A 3.3V voltage supply is required for operation. 48 pins are included. There is a device in this electronic family called LVT. The 48 pins are designed into it. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the Bus Driver/Transceiver subcategory. An electronic circuit can be found on 16 input lines. High efficiency requires a voltage supply of 3.3V. The current consumed by the device is 5mA volts in quiescent mode, which cannot be affected by external factors. A total of 2 elements make up this object. In the low level output current, the value is set to 12mA. There is -12mA output current at the high level. It is recommended to work at a temperature lower than 85°C. It is recommended that the operating temperature be higher than -40°C. It is capable of providing a maximum supply voltage of 3.6V. With a voltage of 2.7V, it operates at its minimum capacity. As far as the logic IC is concerned, it uses BUS DRIVER. Its 12mA output current allows for maximum design flexibility.

74LVTH162373DGGRE4 Features

TSSOP package
8 Bits
48 pin count
48 pins
2 elements

74LVTH162373DGGRE4 Applications

There are a lot of Texas Instruments 74LVTH162373DGGRE4 Latches applications.

• Counter timers
• Avionics
• BCD counting
• Automatic test equipment
• Display
• Control circuits
• Parallel Output
• Multi-line decoders
• Meter applications
• Up-Down Johnson