74LVTH273WM

74LVTH273WM Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). As part of the package Tube, it is embedded. T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 2.7V~3.6V volts, it operates. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74LVTH series. A frequency of 150MHzshould be the maximum output frequency. A total of 1elements are contained within it. This process consumes 190μA quiescents. You can search similar parts based on 74LVTH273. JK flip flop input capacitance is 3pF farads. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. An electronic part designed with 8bits is used in this application. 8 circuits are used to achieve its superior flexibility. Optimal efficiency requires a supply voltage of 3.3V. The JK flip flop is with 7 output lines to operate. The number of input lines is 4. The high level output current is set to -32mA. In the low level output current setting, 64mAis used. If the operating temperature is lower than 85°C, it is recommended. A temperature above -40°Cshould be used for the operation. It operates with the minimal supply voltage of 2.7V. It is capable of supporting a maximum supply voltage of 3.6V. We are able to achieve a frequency of 150MHz.

74LVTH273WM Features

Tube package
74LVTH series
20 pins
8 Bits

74LVTH273WM Applications

There are a lot of ON Semiconductor 74LVTH273WM Flip Flops applications.

• Memory
• Counters
• Data storage
• Buffer registers
• Data transfer
• Power down protection
• Communications
• Computers
• Patented noise
• Consumer