74V1G77STR

74V1G77STR Overview

In the SC-74A, SOT-753 package, it is embedded. The package is in the form of Tape & Reel (TR). In this configuration, the output is set to Standard. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 2V~5.5V. During operation, the temperature is set at -55°C~125°C. An FPGA in this series belongs to the 74V family. An electronic part with 1 bits is designed. There are 5 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74V1G77 family. The supply voltage of the device is 3.3V. It is equipped with 5 pin count. 74V is the family of this electronic device. With the design of the board, there are only 5 pins. It is mounted according to the Surface Mount method. The part is in the FF/Latches subcategory. A voltage greater than 2V must be supplied as a power supply (Vsup). On the basis of its reliability, this device is well suited for TAPE AND REEL. Due to its 8mA output current, it offers maximum design flexibility. In order to achieve its superior flexibility, 1 circuits are used.

74V1G77STR Features

SC-74A, SOT-753 package
74V series
1 Bits
74V1G77 family
5 pin count
5 pins

74V1G77STR Applications

There are a lot of STMicroelectronics 74V1G77STR Latches applications.

• Registers
• Programmable binary
• Serial Output Data Queuing
• Phase comparator
• Counting
• Double bus register system
• Bus system register with enable parallel lines at bus side
• Up/down difference counting
• Hammer Device Information
• Lamp and Display (LED)