74VCXH162373MTD

74VCXH162373MTD Overview

In the 48-TFSOP (0.240, 6.10mm Width) package, it can be found as an embedded module. It is packaged in the way of Tube. It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The voltage supply is 1.4V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. The 74VCXH series of FPGAs is the one this FPGA belongs to. With this electronic part, there are 16 bits. There is no doubt that it belongs to the family 74VCXH162373. The pin configuration of the device is 48. It is mounted according to the Surface Mount method. Input Lines consist of electronic circuits, and there are 4. The binary equivalent of the input line is generated by 4 output lines. In total, it has 2 elements. Its superior flexibility is achieved by using 2 circuits. 12mA is the low level output current. -12mA is the high level output current. Ideally, the operating temperature should be lower than 85°C. It is recommended that the operating temperature be higher than -40°C. 3.6V is the maximum voltage it supports. This device requires a minimum voltage of 1.4V.

74VCXH162373MTD Features

48-TFSOP (0.240, 6.10mm Width) package
74VCXH series
16 Bits
74VCXH162373 family
48 pins
2 elements

74VCXH162373MTD Applications

There are a lot of ON Semiconductor 74VCXH162373MTD Latches applications.

• Address register
• General-Purpose Register
• Control circuits
• Meter applications
• Sample and hold register
• Serial Output Data Queuing
• Parallel-to-Serial Data Conversion
• A/D and D/A conversion
• Double bus register system
• Pattern Generators